GE PT7800SHSS Manual Del Propietário página 30

Troubleshooting tips ... Before you call for service
Problem
DISPLAY
The display is blank
"Control is LOCKED"
appears in display
Control display is lit yet
oven will not start
OTHER PROBLEMS
The door and inside of
the oven feels hot
Oven will not start
Cannot edit cooking
features
The pads on one side
of the control do not
function
30
Possible Cause
Power saver mode may be activated.
A fuse in your home may be blown or
the circuit breaker tripped.
Power outage or surge
The control has been locked.
Clock is not set.
Door not securely closed.
Start/Pause pad or selector dial
not pressed after entering cooking
selection.
Another selection already entered in
oven and Clear/Off pad not pressed to
cancel it.
Size, quantity or cooking time not
entered after final selection.
Clear/Off pad was pressed
accidentally.
The heat lamps produce intense heat
in a small space.
A fuse in your home may be blown or
the circuit breaker tripped.
Some pre-programmed cooking
features may not be able to be edited
to prevent degradation of cooking
performance.
The control has locked out the use of
these pads and need to be reset.
What To Do
Check the Settings menu for clock display
settings. Turn the display on.
Replace the fuse or reset the circuit breaker.
Reset the clock. If the oven was in use, you must
reset it by pressing the Clear/Off pad, setting the
clock and resetting any cooking function.
Press and hold Settings pad for 3 seconds to
unlock the control.
Set the clock.
Open the door and close securely.
Press Start/Pause pad or selector dial.
Press Clear/Off pad.
Make sure you have entered cooking time after
selecting.
Reset cooking program and press Start/Pause
pad.
This is normal. Use oven mitts to remove food
when ready.
Replace fuse or reset circuit breaker.
This is normal.
Press and hold the Clear/Off pad on the other
side of the display for 30 seconds. If this does not
reset the control, it may be necessary to cycle the
circuit breaker.
49-80738