Gree GCF220BKNA Manual Del Usuario página 17

Don't use petrol, volatile oil, lacquer thinner, putty-powder or kerosene.
●
(Otherwise electric shock, fi re or damage of the parts may be incurred.)
The unit can't be washed by water.
●
(Otherwise, electric shock, fi r or malfunction may be incurred.)
Air inlet of sensor of
the unit
Accumulated dust
Cleaner Wipe it
Use cleaner to clean
●
dust around air inlet
and the unit.
If the dirt is hard to
●
clean, use a wet cloth
with a little of neutral
detergent to wipe it.
Use dry cloth to wipe
●
the unit.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Water tank
Fill water for The surface
every time is dirty
Wipe it
Wash it with water
Clean inside of water tank:
● Fill water in water tank
and shake water tank
fi ercely for 5~10 seconds.
Then pour out water.
● If the inside is very
dirty, add a little of neutral
detergent in water and
shake water tank fi ercely
for 5~10 seconds. Then
pour it out and clean
it with clear water
subsequently.
Clean appearance of water tank:
● Wipe it with dry cloth after
cleaning it with clear
water.
● Add a little of neutral
detergent in water to
wash the tank.
15
Water tray
Wash it with water
Once a month or
there is dirt or odor.
(Please refer to page 16 and
page 17 for maintenance.)
Filter subassembly
Press and clean it.
Once a month or
there is dirt or odor.
(Please refer to page 16 and
page 17 for maintenance. )