Warnings And Safety Instructions - Oki HCT-900 Guia Del Usuario

1. Warnings and Safety Instructions

!
WARNING
A fire may result if this equipment is not used with care and for intended applications.
To avoid electric shock or injury, please follow the instructions below strictly：
•
This appliance must be grounded.
•
The temperature of this equipment can reach 500°C. Never touch any metal part
of this equipment.
•
The unit can output extremely hot air; to avoid serious injury, never point the
nozzle towards any part of the body.
•
Never use this equipment near any flammable materials or gases.
•
Never operate the equipment with wet hands.
•
All the electrical circuitry within this equipment is rated to operate at the relevant
mains line voltage (depending on model). Always disconnect the power cord
before beginning any repairs and maintenance work.
•
Only use OK International spare parts for all repairs and maintenance.
! CAUTION – Important Instructions
In order to avoid damage to the equipment, and ensure a proper working environment,
please follow the instructions below:
•
Operate this equipment in a well ventilated room away from any combustible
materials.
•
When not be in use, make sure the unit is unplugged from outlet.
•
Place handle in stand when not in use.
•
Do not drop. Do not use excessive force on the handle. Too much shock and/or
vibration may damage the quartz crystal inside the handle's thermal tube.
•
Do not operate on uneven surfaces.
•
Do not pull or carry the equipment by the handle; this may break the wire inside
the handle or disconnect the air tube.
•
Allow to cool down before storage.
•
When resting the handle on the hander holder, make sure there are no objects
within 30 cm of the tip of the nozzle as nearby objects maybe damaged.
•
Do not leave the equipment unattended when switched on.
•
Do not disconnect from the mains voltage until pump has stopped running.
www.okinternational.com HCT-900 Rev. 10/13/2005
2