Liberty Pumps 442 Serie Manual De Instalación página 9

5. StormCell™ Interface Functionality
If applicable, refer to
Indicates a low 9V battery.
NightEye™ quick-
9V battery should be replaced at least
Pump run LED, illuminat- start guide for more
yearly, or as required if this LED is
ed when the 442 pump is
information.
illuminated.
activated.
Power Indication - indicates
user interface has power
(Illuminated by charger pow- Setup LEDs—only present
Clear System Notifications
er through RJ45 communica- on NightEye™ models.
Fault LED—indicates a system
tion cable)
fault.
PUMP
LOW 9V
POWER FAULT
RUN
BATTERY
SETUP
CLEAR
PUMP
TEST
ALARM
SILENCE
TEST
Pump Test—Pump will run for
Navigation Buttons, StormCell™ UI LCD
3 seconds or until the test button
scroll through notifications
Displays system / fault info
is released.
on UI LCD
Alarm Test—Alarm will
Alarm Silence Button
sound for approximately 5
Resets after 6 hours or if
seconds. NightEye™ enabled
'Silence' button is pressed again.
devices will send notifications
as appropriate.
©Copyright 2016 Liberty Pumps Inc. All rights reserved. 9