Set Up Instructions - Schumacher Electric SL1391U Manual De Uso

4.5 Determine which post of the battery is grounded (connected) to the
chassis. If the negative post is grounded to the chassis (as in most
vehicles), see step 4.6. If the positive post is grounded to the chassis,
see step 4.7.
4.6 For a negative-grounded vehicle, connect the POSITIVE (RED) clamp
from the jump starter to the POSITIVE (POS, P, +) ungrounded post
of the battery. Connect the NEGATIVE (BLACK) clamp to the vehicle
chassis or engine block away from the battery. Do not connect the
clamp to the carburetor, fuel lines or sheet-metal body parts. Connect
to a heavy gauge metal part of the frame or engine block.
4.7 For a positive-grounded vehicle, connect the NEGATIVE (BLACK)
clamp from the jump starter to the NEGATIVE (NEG, N, -) ungrounded
post of the battery. Connect the POSITIVE (RED) clamp to the vehicle
chassis or engine block away from the battery. Do not connect the
clamp to the carburetor, fuel lines or sheet-metal body parts. Connect
to a heavy gauge metal part of the frame or engine block.
4.8 When finished using the jump starter, remove the clamp from the
vehicle chassis and then remove the clamp from the battery terminal.
Disconnect the clamp cable from the unit.
5.

SET UP INSTRUCTIONS

5.1 Remove any cord wraps and uncoil the charging cable.
6. FEATURES
Model SL1398U is shown.I
1 2
7
3
6
1. Flashlight
2. Power button
3. USB 2.1A output port
4. Battery level LED
5. Micro USB 5V, 2A input port
6. Jumper cable output socket
8
7. Smart cable/clamps
8. Micro-USB charging cable
Not shown:
9. String for tactical jump starter
10. Bag for clamps and Micro-USB
cable (SL1391U and SL1398U)
• 5 •
4
5