Avaya 10U100 Manual De Uso página 15

60653-01 10U100 UserGuide_r2 5/11/01 12:12 AM Page 14
receive
3
E N G L I S H
a c a l l
Set the Ringer Switch on the Remote to the
ON position.
To answer a call press the Talk/Hangup Button . The
In-Use Indicator on the Remote and the In-Use
Indicator (Talk) on the Base will light.
When you press any button on the Remote, a short
sound will be heard indicating that the Base has
accepted the command.
Three short warning beeps indicate that you are out of
range, or there is too much interference.
If there is interference, move closer to the base before
you press any key. If interference is severe, the Remote
might lose communication with the Base and the call
might be disconnected. This does not happen often,
but if it does, return the Remote to the Charging Well
for a few seconds.
14