Troubleshooting; Safety; Service Address; Position And Labelling Of Fuses - Gebhardt Anlagentechnik TD13 Manual De Uso

9

Troubleshooting

9.1

Safety

See Chapter 2 Safety.
9.2

Service address

See Chapter 1 Important basic information.
9.3

Position and labelling of fuses

See wiring diagram.
9.4

First measures for troubleshooting

Disturbance / error
message
Only the water control display
is lit and after a short delay
nothing happens
Only the water control display
is lit and water runs out of the
steam connection
The amount of steam
produced is too low.
No control display is lit
Translation of the original operating manual Steam Generator TD
14.11.2017
Possible reason(s)
Water supply is blocked or
cut.
Level switch defective
Machine does not run at full
power.
Defective heating elements
Safety elements have become
released (temperature sensor,
fuses).
Troubleshooting
Remedy
Check water supply.
Change level switch.
Have an electrician check
whether there is electrical
power on all three phases.
Descale the Steam Generator.
Have an electrician check
whether the electrics of the
machine are in working order.
Site 43 of 96
English