Erreka ROLLER V-II Manual Del Usuario página 24

be changed, enter the current code or switch the console off directly.
7.- SEE TRANSMITTER CODE
This function displays the code of a transmitter, as well as its corresponding
installation number.
Given that the code installed in the transmitter is encrypted using the
Microchip CODE-HOPPING method, only transmitters corresponding to the
standard ERREKA installer code or those corresponding to the console
access may be displayed
Pressing enter accesses the function, where insertion of the transmitter is
requested.
INSERT TRANSMITTER
By inserting the transmitter and pressing Enter, the code is immediately
displayed on the screen.
TRANSMITTER CODE R1
XXXXXXX YYYYZZZZ
Wher XXXXXXX
YYYY
ZZZZZ
R1
To return to the menu, press Enter or Escape
8.- SEE MEMORY CODE
This function displays the type of memory, its installation code and the
number of entries occupied.
Given that the code installed in the memory is encrypted using the Microchip
CODE-HOPPING method, only memories corresponding to the standard
ERREKA installer code or those corresponding to the console access may
be displayed.
Pressing enter accesses the function, where insertion of the memory in
socket A is requested
INSERT MEMORY
IN SOCKET < A >
By inserting a memory and pressing enter, the console will display its codes.
MEMORY OK XXXX
YYYYZZZZ
Where XXXX
YYYY
ZZZZ
RRRR
To return to the menu, press Enter or Escape
is the transmitter code or series number
is the installer code
is the installation code
is the replacement code
RRRR
is the type of memory with 250, 500 or 1000 code
is the installer code
is the installation code
is the number of records occupied
24
English