Blending jar
Kneading shaft assembly:
Remove the blade, fix the kneading shaft the same way as fixing the
blade. It can be used for kneading, or stirring and mixing without
cutting the food.
•
Do not use it for speed over 3, otherwise it will cause big
vibration to the machine and cause risk.
•
As the smallest distance between the stirring assembly and the
jar wall is only 1cm, sometimes the food may stuck and the
motor may stop for self-protection. Use the spatula to mix and
remove the stuck and it will be smoothly working again.
Please make sure that the fixing bracket and the sealing ring is
•
in place and locked tightly with blade assembly. If the sealing
ring isn't well placed, the food being mixed or cooked may
leak out and damage the appliance.
The blade is very sharp. Please wrap the
•
blade with washcloth when assembling or
removing the blade base.
Please hold the blade assembly firmly and
•
take it out carefully so as to ensure that blade
assembly will not fall down and cause
danger.
•
Please make sure that the fixing bracket and
the sealing ring is in place and locked tightly
with blade assembly. If the sealing ring isn't
well placed, the food being mixed or cooked
may leak out and damage the appliance.
Attention
EN-13
Attention