THOMSON GENI MIX PRO CONNECT Manual De Instrucciones página 50

STOP/ CANCEL
Get the machine plugged, turn on the switch at the back of the
•
machine, the machine beeps once.
Press this button during setting period, all setting cleared and come
•
back to standby mode.
Press this button during working process, and the appliance stops
•
working immediately and come back to standby mode.
Press this button during DIY recording process, and the appliance
•
stop working and cancelled recording.
The machine will turn off automatically in 30s without operation
•
under standby mode.
START/ PAUSE/ KNOB
Press this button, and all the back lights turn on and comes to
•
standby mode, you can select the desired functions.
After selected the desired setting or program, press this button to
•
start working immediately.
Press this button during
•
pause working and standby, LCD shows. (You can open the lid,
take away the jar, etc. But it must be fixed well again before re-
starting). Press it again and it starts again.
The machine will turn off automatically in 10min without operation
•
under PAUSE status.
It is also a knob for setting timer, speed, temperature, with
•
increasing when turn the knob clockwise, and decreasing when
turn the knob anti-clockwise, or choosing among the 15 auto
programs.
TIMER
The LCD screen
•
Press timer button and the minute signal on LCD flicker; Turn the
•
knob to adjust the minutes. Press it again, the second signal on LCD
flicker, turn the knob to adjust the seconds. Press it again, the hour
signal on LCD flicker, turn the knob to adjust the hours from 1-12h.
Press the timer during working process, the machine starts to count
•
down directly.
Max 60min by manual setting; max 3h under DIY setting. The timer
•
limit of each program please refer to chapter "MENU" below.
working process, the machine
shows, it means hour: minute: second.
EN-18