Operating Functions - Oase AquaMax Eco Classic 9000 C Instrucciones De Uso

6.2

Operating functions

Switching the pump on/off
Proceed as follows
Increasing or decreasing rotation speed
Proceed as follows
Displaying current status values
Proceed as follows
Switching the wireless connection on/off
Proceed as follows
Press the button briefly to turn the pump
on or off.
Press the desired button several times or
push continually in order to change the ro-
tation speed in percent.
Press the button briefly to select the next
mode.
Press and hold the button for longer than
10 s.
Information
–
Information
• Adjustable range: 1 % ... 100 %
• Increment: 1 %
• Adjustment is only possible in "Speed / %" or "Power / W"
modes.
• The adjusted value is immediately adopted.
• By pressing a button the controller automatically switches to
"Speed / %" mode.
After 15 s without operation the controller automatically
switches to "Power / W"mode.
Information
"Runtime / h" mode
• Displays the total operating hours of the pump
• Displays up to 9999 operating hours: 0 to 9999
− Displayed increments: 1 hour
• Displays from 10000 to 99900 operating hours: 100H to 999H
− Displayed increments: 100 hours
− Example: 022H = 22 × 100 = 2200 operating hours
"Power / W" mode
• Displays the current power consumption of the pump in
watts
− Tolerance: ±5 % of the max. power consumption.
(→ Technical data)
"RPM" mode
• Displays the current speed of the pump in revolutions per
minute
"Speed / %" mode
• Displays the current speed in percentage
− Display range: 1 to 100
After 15 s without operation the controller automatically
switches to "Power / W"mode.
Information
• If boF appears in the display, the wireless connection is
switched off.
• If bon appears in the display, the wireless connection is
switched on.
− The LED in the display lights up when the wireless con-
nection is switched on.
− The LED in the display blinks when connected to the
OASE App.
− (→ Controller overview)
• When the unit is delivered, the wireless connection is
switched on.
After 15 s without operation the controller automatically
switches to "Power / W"mode.
- EN -
23