Premier SCR-2067TFT Manual De Instrucciones página 41

BASIC OPERATION
. BAND BUTTON
5
In RADIO mode, press the BAND button on the front panel or on the remote
controller to select your desired radio band and word which band is selected
will be displayed in the TFT . Press it to change the bands as below :
FM MW
For 3 Bands (Europe)
In Bluetooth menu, you can press this button to use the Bluetooth funtion,
please refer to see page 16.
6. EQ BUTTON
Swing the SEL knob briefly in the EQ direction to turn to equalization function
and to select desired audio mode. There are five kinds of mode as below:
7. APS/DISP BUTTON
Automatic Memory Function:
In Radio mode, swing the SEL knob in the direction of APS/DISP for about 2
seconds to active automatic station storage.the radio searches within the current
frequency band, e.g. FM1, for the strongest station are then allocated to the
corresponding storage locations. Then the station of the first storage location
is set. If you would like to search for more stations in the FM band, press the BND
button(5) in order to change to the FM2 or FM3 band. Swing the SEL button (4)
again in the APS/DISP direction for about 2 seconds to continue search.
Program Scan Function:
In Radio mode, swing the SEL knob in the direction of APS/DISP to scan and play
all the preset sations in order, and it will hold at each band for about 5 seconds .
If you like one of them, press the PLAY/PAUSE button to stop the scanning .
Display ON/OFF Function:
In Disc mode, swing the SEL knob briefly in the direction of APS/DISP to turn off
the display image (the monitor on the unit only) , the sound will stay on. (Swing it
again to resume the playback picture mode.) You can press SEL knob briefly to
select the "BG COLOR" by repeatedly pressing the SEL knob, then rotate the
VOL+/- to select the background color among of the
"AUTO, BG COLOR: 01........BG COLOR: 11", in " AUTO" mode, the monitor of
unit will change the background color automatically.
TV System Select
In TV mode, press the SEL knob repeatedly to select the TV standards, and then
you can use the VOL+/- to change among of the "NTSC, PAL-M, PAL-N" .
8. MU BUTTON
Press it button to switch of the loudspeakers for a short period. The word MUTE
flashes in the display. Press it again to cancel the mute function. This function
can also be cancelled by rotating the VOL multifunction button.
9. (ANGLE)BUTTON
you can change the viewing angle of the operating unit . Press this button up to
four times in order to select the desired position.
Page 12
All manuals and user guides at all-guides.com
LW FM
For 2 Bands (Europe)
JAZZ CLAS POP
WWW.PREMIERMUNDO.COM WWW.PREMIERMUNDO.COM
MW FM
For 2 Bands (USA)
ROCK FLAT
AM