Video Quality Adjustment; Rear View Camera - Premier SCR-2067TFT Manual De Instrucciones

WWW.PREMIERMUNDO.COM WWW.PREMIERMUNDO.COM
BASIC OPERATION
Adjust the Volume
During conversation in progress, tune the Volume switch until you reach the
desired volume level.
Play MP3 music
In Bluetooth menu, press MOD to select the "BT MUSIC", you can play the MP3
from your mobile handset. (Note: please make sure it support the Bluetooth
A2DP profile.)
Note:
a). Before using the function of the Blue-tooth about the unit, please check your
phone's instruction guide or contact phone manufacture if you are not sure if your
phone supports the hands-free Bluetooth function .
b). When operating the function of blue-tooth about the unit, you need make your
call-phone and the unit successfully for one time. Afterwards, you only need to
take on the power and the function of blue-tooth will work in three minutes
automatically if you want to operate the function of blue-tooth .
c). If you want not to use the function of the Blue-tooth about the unit, you can
select the Bluetooth OFF .(The method to see the page 11.)

Video Quality Adjustment

Press SEL button briefly to across the sound/picture mode selection menu
by repeatedly pressing the SEL button you can select the individual menu items
such as volume, bass, treble, balance, fader, color, bright, contrast, tint , BG color
and Bluetooth . Then rotate the VOL + / - to adjust the selected mode.
(The corresponding value will show on the display.)
Volume
Tint
Adjustable Items:
COLOR: 0 to 32
Adjust the color fo the picture-lighter or darker.
BRIGHT: 0 to 32
Adjust if the picture is too bright or too dark.
CONTRAST: 0 to 32
Adjust the contrast of the bright ans dark portion.
TINT: 0 to 32
Adjust the tint if the human skin color is unnatural.
-Adjustable when "NTSC is selected for NTSC/PAL
(The function of the VOLUME, BASS, TREBLE, BALANCE and FADER, Please
see page 11.)

Rear View Camera

When connecting the rear view camera.the mirror image of the rear view through
the rear view camera is automatically displayed on the monitor when you change
the gear to the back position.(The monitor on the unit only.)
NOTE(For The Brake Function)
if the parking brake is not engaged,"parking brake" flashes on the monitor,
and no playback picture will be shown. Only the audio will be heard.
-This warning appears only when the parking brake wire is connected to the
parking brake system built in the car. (See page .8)
All manuals and user guides at all-guides.com
Bass Treble Balance
Contrast Bright
"
Fader Bluetooth
Color BG Color
" " .
Page 17