overview
Do not allow children or inexperienced persons to use the
appliance.
Damage to the appliance may be caused by improper use.
Electrical connections must be made using conductors with a
suitable cross section.
Fire due to overheating caused by current passing through cables
which are too small.
Protect appliances and nearby areas using suitable equip-
ment.
Damage to the appliance or to objects nearby caused by projec-
ted debris or fragments, cuts, incisions.
Move the appliance using the necessary protective equip-
ment and with the utmost care.
Damage to appliances or nearby objects caused by impacts, inci-
sions or crushing.
Ensure that all equipment is stored in a way that makes it
simple and safe to handle; avoid creating piles which are in
danger of collapsing.
Damage to appliances or nearby objects caused by impacts, inci-
sions or crushing.
Reset any safety and control functions affected by an opera-
tion on the appliance, and make sure that they are operating
correctly before it is put back in service.
Damage to or stoppage of the appliance due to uncontrolled
operating conditions.
Before working on roofs, structures, surfaces, etc., ensure
that they are stable and suitable for the work to be carried
out.
Injury or death due to collapsing and/or falling from height.
SAFETY STANDARDS SPECIFIC TO THE PRODUCT
Drain any components which contain hot water by activating
the drain before using them.
Injury caused by burns
Descale components in accordance with the instructions in
the safety sheet for the product in question. Carry out the
operation in a well-ventilated area and wear protective clo-
thing. Avoid mixing different products and protect the ap-
pliance and nearby objects.
Personal injury through skin and eyes coming into contact with
acidic substances, inhalation of ingestion of harmful chemical
agents.
Damage to the appliance or objects nearby due to corrosion
caused by acidic substances.
Do not carry out work on the product in strong sunlight.
Injury caused by burns
TRANSPORT, STORAGE AND RECYCLING INSTRUCTIONS
The appliance must be transported in accordance with the picto-
grams on the packaging.
The appliance must be transported and stored in dry conditions and
freezing conditions must be avoided.
EU directive 2002/96/EC requires selective collection
and recycling of used electrical and electronic devices.
The "crossed-out wheeled bin" symbol on the appliance
indicates that the product must be disposed of separately
from standard household waste at the end of its useful life,
and must be brought to a waste sorting centre for electri-
cal and electronic devices or returned to the seller when a
replacement appliance is purchased.
DECLARATION OF CONFORMITY
Conformity of design and production
This product conforms to EU directive 97/23EC, article 3, paragraph 3
concerning pressure equipment and 93/69/CEE relating to standard
EN12897-2006 specific to indirectly heated, unvented water heaters.
GB
29