Travel Lock; Charging Operation - Wahl 7061 Manual De Instrucciones

EN
FEATURES
1. Charging Socket
2. On/Off Switch
3. Cutter Bar Assembly
4. Flex Foil Head
5. Long-Hair Pop-Up Trimmer
TIPS FOR FIRST-TIME USERS
If you are using an electric shaver for the first time, your skin will probably need to
condition itself to this new shaving technique. Start on the easiest part of the face first,
usually the smooth portion of the face below the ear. Shave with a light touch and use
your Wahl Shaver exclusively for three to four weeks, or longer if you have sensitive
skin or if your whiskers grow at different angles in certain areas. Initially your shaves may not
be as close as you would like, and your skin may become a bit irritated. But if you stick with it,
you will eventually get great shaves.
If you go several days without shaving and your beard gets a bit long, use the pop-up trimmer to
go over your beard, catching all the longer hairs and setting up the remaining stubble for the foil
to shave smooth and clean.
If you have been using another type of electric shaver before, there may also be a period of
conditioning prior to receiving maximum results.
QUICK TIPS & HANDY REMINDERS
1. If you are a first-time electric shaver user, or changing from another brand, there will
be a 2 to 3 week (or less) adjustment period while your face and beard adapts to
the new foil.
2. When you open your package, charge your shaver for 1 hour before the first shave
or until charging is complete.
3. Replace the foil head and cutter bars every 12 months or if foils are damaged.
Replacement foils can be ordered at https://home.wahl.com.
4. Be sure to clean the shaver, cutter bars and foil after every three or four shaves.
5. Use the pop-up long-hair trimmer to snip stray hairs.
6. Keep using and both your face and beard will adapt to the shaver.

TRAVEL LOCK

The Wahl 7061 Series Shaver comes with an electronic travel lock to avoid accidental
activation while transporting.
Hold power button down for 3 seconds to engage travel lock.
Hold power button down for 3 seconds to disengage travel lock.
When travel lock is active, pressing the power button will cause the LED(s) to flash for
1 second.
NOTE: The shaver will not charge while the travel lock is engaged.

CHARGING OPERATION

The shaver cannot be overcharged, so you may charge it as often as desired.
However, periodic recharging of the shaver, rather than continuous recharging, will
prolong battery life.
60 minutes charge time will provide you with 90 minutes cordless operation.
Charge when shaver seems to lose power or run slower. The
charging LED will light up while charging. LED will turn off when charging is complete.
MODELS WITH 1 LED
Charge when shaver seems to lose power or run slower. The charging LED will light up
while charging. LED will turn off when charging is complete.
6
91590-400.indd 6
6. Long-Hair Trimmer Switch
7. Shaver Head Release Button
8. Foil Guard
9. Charger Contacts
10. Spring Clips
Note: Remove LED label before first use.
7/2/18 5:55 PM