Hamilton Beach 78211 Manual Del Usuario página 6

Making Bags From Bag Rolls
1
Determine size of bag needed
based on size of what is being
vacuum-sealed. Allow enough
space for sealing top and bottom
of bag. Cut to size.
NOTES:
•
Allow 20 seconds between each use.
•
Never open the lid during use.
•
Do not let moisture into the vacuum chamber.
This may damage the motor.
6
2
Center open end of bag within
vacuum chamber.
3
Close and hold lid; then press
Seal Only button. Continue
holding lid closed during
entire sealing process.
4
Wait until light turns green before
letting go of lid and removing bag.
Burn Hazard. Seal
w CAUTION
bar is hot. Avoid touching it.
Allow unit to cool 20 seconds
before making or vacuum-sealing
another bag.