Paradox dIGIGARD DG85 Guia De Instalacion página 36

Feature
Operational
mode
Signal
processing
mode
LED
Movement
Signal Indication
Tamper
recognition
Sensitivity
= default settings
* = DGP2 Mode only
† = DGP2 Mode and Relay Mode
Modify the detector's settings using the DIP switch
and trim pot or by entering Module Programming
Mode (DGP2 Mode only) via any system keypad.
For figures, refer to pages: 27 to 31.
Detector Settings
Section
Setting
Programming
Relay N/A
DGP2 N/A
Dual [001] [1]=OFF DIP switch 2=OFF
Single [001] [1]=ON DIP switch 2=ON
Disabled [001] [2]=OFF DIP switch 3=OFF
Enabled [001] [2]=ON DIP switch 3=ON
Disabled [001] [3]=OFF Enabled if DIP
Enabled
[001] [3]=ON
Disabled [001] [5]=OFF N/A
Enabled [001] [5]=ON N/A
=10
[002] 000- 010 Trimpot 0 -10
Manual Settings†
*
DIP switch 1=OFF
DIP switch 1=ON
switch 3=ON