Tabla de contenido
Publicidad
FIG. 11a
14
ENGLISH
HOW TO USE
CAUTION: Do not plug in cleaner until you understand all controls
Step 1: Plug in Vacuum. (FIG. 10) Unwrap the cord by turning the quick
FIG. 10b
FIG. 10a
FIG. 10
Step 2: Put Cord on Cord Retainer. To use, push electrical cord down
FIG. 11
Step 3: ON/OFF Switch. The ON/OFF Switch is on the base. Press once
FIG. 12
(CONTINUED)
and features.
release cord hook (FIG. 10a), unwind the cord and plug into an
appropriate outlet. The plug has a wider prong that will only fit
one way into the receptacle (FIG. 10b).
into cord retainer (FIG. 11a). You will find your cord retainer on
the handle above the upper cord hook. This will place the cord
out of the way the next time you vacuum (FIG. 11).
to turn on and press again to turn off (FIG. 12).
Publicidad
Tabla de contenido
