IROX JB913R Manual Del Usuario página 6

P/N.: 086L001545-338 REV1
Page 6 of 44
Maximum Button to Displays
press
Current 23°C
temperature/ 68%
humidity
Recall the Press [MIN] MIN 18°C
minimum button once MIN 58%
temperature/ ("MIN" indicator,
humidity minimum
temperature and
humidity displayed)
Clear the Press [MEMORY MIN 23°C
minimum CLEAR] button MIN 68%
temperature/ once (display updates as the
humidity current temperature
and humidity)
Return to Press [MIN] 23°C
current button once again, 68%
temperature/ while minimum ("MIN" indicator
humidity temperature and disappears)
humidity is displayed
Occasionally clearing the memory will allow you to record
maximum / minimum temperature / humidity at specified periods.
HOW TO READ THE RELATIVE
HUMIDITY AND COMFORT INDICATORS
The unit shows the indoor relative humidity with such readings
compensated by temperature. At the same time, the comfort
indicators COMFORT, WET or DRY will tell you if the current
indoor environment is comfortable, too wet or too dry. The comfort
indicators will appear on the display when the following conditions
are satisfied:
Indicator Temperature Humidity Shows that the
Displays Range Range Current Indoor
on the Unit (Indoor) Environment
COMFORT 20°C to 25°C 40% RH to Ideal range for
(68°F to 77°F) 70% RH both relative
humidity and
temperature
WET Over Contain excess
Full Range 70% RH moisture
DRY Below Contain
40% RH inadequate
moisture
No Below 20°C 40% RH to No comment
Indicator (68°F) or 70% RH
Higher than
25°C (77°F)
4