Telstar TVO016110MD Manual De Instrucciones página 9

OPERATION INSTRUCTION
• Air supply through the fan oscillating (as shown in Figure 8)
The fan can be rotated in 360 degrees, and the air supply range can be adjusted,
as long as the oscillating arm is pressed slightly by manual to adjust it to the desired
position, and the press down to stuck the oscillating pin. The air supply range is
controlled by two gears.
MAINTENANCE INSTRUCTION
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service
is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not
disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the
following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.
3. Thoroughly remove soap film with dry cloth.
9
ORBIT FAN
TVO016110MD
Figure 8
Connecting
rod
Oscillating
pin