SenerTec Dachs MSR2 Instrucciones Para El Montaje, Puesta En Marcha Y Manejo página 23

english
First fit the corrugated pipe to the ball valve (flat
gasket 24x20x2).
Fit the corrugated pipe to the pump suction
side with flat gasket 1", adjust corrugated pipe
if required (Fig. 3.10).
To adjust the height, loosen the 2 fixing screws
of the hot water module and shift the module as
necessary (Fig. 3.5).
Mount the hose (2x flat gasket 3/4") between
the ball valve on the return flow coupling and
the top right T-coupling on the heat exchanger
(Fig. 3.11).
Fig. 3.10: Corrugated pipe
Fig. 3.11: Hose
GB
23