Dvd/Vcd Video Operation; Inserting A Disc; Ejecting A Disc; Accessing Dvd Mode - Jensen VM9224 Manual Del Usaurio

VM9224

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the
main TFT screen unless the parking brake is applied. If you attempt to
play a DVD while the vehicle is moving, the TFT screen displays
"PARKING" with a blue background. Rear video screens, if applicable,
will operate normally.

Inserting a Disc

Upon inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc must be
authorized (see "Rating Sub-menu Features" on page 21).
You cannot insert a disc if there is already a disc in the unit or if the power is
off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is
finalized and the DVD is closed.

Ejecting a Disc

Press the button (3) on the unit or remote control (35) to eject the disc. The
unit automatically reverts to Tuner mode. You may eject a disc with the unit
powered off. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button (3) on the unit or remote control (35) to reset the
loading mechanism. Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button
(4) on the front panel or remote control (8).
28