Periodic Maintenance Schedule; Changing Oil - Wacker PT2R Manual De Operación

PT2R

1.19 Periodic Maintenance Schedule

The chart below lists basic pump and engine maintenance. Refer to engine manufacturer's Operation Manual for
additional information on engine maintenance. A copy of the engine Operator's Manual was supplied with the machine
when it was shipped.
Check fuel level.
Check engine oil level.
Inspect for leaks between pump and engine.
Inspect air filter. Replace as needed.
Check and tighten external hardware.
Inspect shockmounts for damage.
Change oil in pump housing.
Change engine oil.
Check and clean spark plug.
Check air cleaner.
Clean fuel strainer.
Check and adjust valve clearance.
Clean cylinder head.

1.20 Changing Oil

Drain oil while engine is still warm.
(e)
1. Remove oil fill plug
2. Install drain plug.
3. Fill engine crankcase with recommended oil up to
(g)
level of plug opening
Oil capacity - 21 oz. (650 ml).
4. Install oil filler plug.
(f)
and drain plug to drain oil.
.
Daily After
before first two weeks
starting 20
hours
OPERATION
Every Every
month 6 months
or or
50 hrs. 100 hrs. 500 hrs.
e
f
1A
Every
or
g
1005SD53
1A-11