Velleman HOMEGUARD VCC2 Manual De Instrucciones página 20

Status Retain: the current status (viewing and recording modes) will be retained and restored when the
DSR starts up the next time and when the 'status retain' box is checked.
Auto Start: Click 'auto start' to enable the DSR to start automatically. The logon process will be skipped
when the DSR starts up next time. You should select auto start and select 'super 'or 'operator'.
Allow OPERATOR to exit: When checked, the 'exit' button will be available to the OPERATOR.
At Logoff: Select the 'continue displaying' box if you want the image to continue being displayed during
logoff.
Date/Time Display: You can select the date/time display format as 12-hour or 24-hour format.
g. DSR Configuration
-- The user can go to the control panel and
double click the DSR configuration icon to
get the DSR configuration dialog box.
-- A 'logon' dialog box will pop up for
password protection. Use the SUPER
username and the corresponding
password to gain access to the DSR
configuration.
-- You can configure the DSR before
running the DSR program.
1) Alarm Alert
Enables the Alarm Alert function.
2) Alarm Files Overwrite
By default, the alarm files will not be deleted during circular mode.
However, the user can check the enable box to allow the oldest alarm files to be deleted during circular
recording.
Note: Motion detection triggered and hardwire triggered alarm files are equally treated as alarm files
3) Configuration Backup and Restore
This utility allows the user to back up the DSR configuration prior to installing or re-installing the DSR
software in order to prevent loss of configuration data. Also, a DSR configuration template disk can be
prepared for easy DSR setup during mass production. The configuration parameters to be backed up
include following items:
--Camera title, enable/disable
--System settings
--Recorder settings
--Motion detection settings
--System retain parameters
--Alarm schedule (the one which is currently in use)
VCC2
20
.
VELLEMAN