Velleman HOMEGUARD VCC2 Manual De Instrucciones página 8

RECORDER CONTROL PANEL
There is a "RECORDER" control panel with 4 camera buttons which can be set on and off. Each
button has a different colour to indicate the different recording types and status. The available
indicator colours are red, light blue, yellow and green.
Only one recording type is available to each camera at one time and its priority is as follows:
RED: Alarm recording, initiated by alarm input or motion detection.
LIGHT BLUE: Indicates the pre-alarm function of that camera.
YELLOW: Instant recording, which is initiated by clicking the camera button on the recorder panel
manually.
GREEN: Scheduled recording, which is controlled and started by the programmable timer.
1) Instant Recording
Instant recording is the most interactive way and an easy to use recording method.
- It is designed to start recording instantly to capture some unexpected special events.
- It works complementary to scheduled recording.
- You can simply switch the video recording on or off by clicking the camera button on the
"RECORDER PANEL".
- The button you have clicked will turn yellow as an indication that this particular camera is under
instant recording.
- The instant recording parameters of each camera can be programmed (please see 'Instant
Recording Setting' for parameter setup.)
Note: The instant recording video will be chopped into files of 15 minutes in order to keep the files at an
accessible size.
Tip Instant recording can be used to work at a fast frame rate for a short recording time while
scheduled recording uses a lower frame rate for a longer period of time.
VCC2
Click on any camera button to start instant
recording of that camera.
Click this button to start instant recording of all
cameras. Click it again to stop recording.
8
VELLEMAN