3
Place the basket in the base (Fig. 3).
4
Place the items to be sterilized in the basket (see chapter 'Preparing for use').
5
Put the lid on the sterilizer (1) and push down the clips to lock the lid into place (2) (Fig. 4).
6
Place the sterilizer in the microwave. (Fig. 5)
Note: Make sure that the microwave is clean and dry before you start sterilizing.
7
Select the appropriate microwave wattage and time (see table) and let the microwave
operate.
Note: If you have a combination oven, make sure that the oven or grill is turned off and has cooled
down before you put the sterilizer in it.
Note: Do not exceed the sterilizing time indicated in the table.
Microwave wattage and time
Wattage
1200W-1850W
850W-1100W
500W-800W
8
After the microwave has finished, open it and let the sterilizer cool down before you
remove it from the microwave.
Be careful, hot steam may come out of the microwave.
9
Remove the sterilizer from the microwave.
Note: Make sure you keep the sterilizer level to avoid leaking or spilling hot water.
Note: The sterilized items remain sterile for up to 24 hours in the microwave sterilizer if you do not
remove the lid.
10
Pull open the clips (1) and remove the lid (2) (Fig. 6).
11
Remove the bottles and other items from the basket. Use the tongs to remove the smaller
items.
Be careful, hot steam may come out of the sterilizer and the sterilized items may still be hot.
12
When you have removed the sterilized items, pour out the remaining water, rinse the base
and basket thoroughly and wipe all parts dry.
sterilizing time
2min.
4min.
6min.
ENGLISH
Cool-down time
2min.
2min.
2min.
9