Belkin OmniView PRO3 Guía De Instalación Rápida página 3

The 8- and 16-port PRO3 KVM Switch include adjustable mounting brackets
ideal for installation in 19-inch racks. The mounting brackets feature three
adjustment positions to allow you to set the Switch's face flush with the ends of
the rails or to extend the Switch past the front of the rails. Please follow these
simple steps to achieve the desired adjustment.
1.1
Determine how far you would like the Switch to protrude from the rack.
Select a bracket-hole scheme.
1.2
Attach the bracket to the side of the Switch using the Phillips screws
provided. (Refer to diagram below.)
5458ea-F1DA1xxz -QIG.indb 3
Step 1
Mount the Switch
Mount the Switch 3
6/5/07 4:28:18 PM