Tabla de contenido
Publicidad
ENGLISH
WARNING
!
To reduce the risk of electric shock, turn
Power Switch off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting checks.
MAINTENANCE & CARE
Clearing a Clog
Low suction or poor pickup may be due to a clog in the
vacuum. If you notice a change in the sound of the vacuum
motor, check for clogs.
• Turn power OFF. Unplug vacuum cord from electrical
outlet.
• Empty Dirt Tank.
Fig. 1 Check upper tank and suction inlet for clogs. Grasp
Hose Wand Base and remove from Foot Hose. Check
for clogs in the Foot Hose, Hose Wand Base and the
Hose.
Grasp Quick Reach
from base to check for clogs in the base, the wand,
and the hose.
Fig. 2 Remove the screw attaching the foot Hose Wand
base to the vacuum. Straighten the foot Hose Wand
base and unclog, with long, narrow object such as a
broom stick. Reattach the foot hose and secure with
screw.
If the clog persists, follow steps for checking rotating
floor brush on page 12 and inspect the air
passageway for obstructions.
16 www.sanitairecommercial.com
Handle and remove Hose Wand
®
Fig. 1
Fig. 2
Publicidad
Tabla de contenido
