Fm Transmission Setting; (Option Exclusive Only Some Models - Specified On The Product Packaging) - Multilaser GP011 Manual Del Usuario

Close
Volume -
Volume +
Screen tap sound
Current volume

7.2 FM transmission setting

FM transmission main function is output audio of navigator to the FM reception equipment, click the
"volume setting interface" button
picture.
[Note]: Navigator FM transmitting frequency must be the same with the reception equipment's received
frequency; Do not use has broadcasting station's frequency, in order to avoid the broadcasting station
signal and the navigator signal disturb mutually.
Close
Frequency -
Frequency +
Start FM function
Current frequency
Click to quit the volume adjusting application;
The system provides ten-grade volumes (from silence to maximum);
click to decrease the volume in one grade;
The system provides ten-grade volumes (from silence to maximum);
click to increase the volume in one grade;
Click it to select Loud, soft or OFF;
The red bars refer to the volume grade with one bar indicating one
grade

(Option exclusive only some models - specified on the product packaging)

, and enter into "FM transmission setting interface", as shown in 8-3
Click to quit the frequency adjusting application.
Click to decrease the frequency in one grade (pergrade: 0.1MHz).
Click to increase the frequency in one grade (per grade: 0.1MHz).
Select express FM transmission function starting, contrarily express
closing.
Show the current frequency of FM.
Multilaser Tracker
57