Language Setting; System Information; Calibrate - Multilaser GP011 Manual Del Usuario

7.5. Language Setting

The language setting is shown as Figure 7-5:
F 7-5: s
igure etting oF language interFaCe
Click the button or

7.6. System information

The system information setting is shown as Figure 7-6:
F 7-6: s
igure etting oF system inFormation interFaCe

7.7. Calibrate

Click the button to prompt the "Touch Screen Calibration" interface (as shown in Figure 7-7);
click the cross center with the touch pen and the cursor moves towards the center, top left corner, bottom
left corner, top right corner and bottom right corner until successful positioning. The system will close the
interface automatically and back to system interface.
in the language bar to select a system language.
Multilaser Tracker
59