Channel Scan - Multilaser GP011 Manual Del Usuario

8.6.1 Channel Scan

Index GUI Component
1
2
68
3
(or Stop)
4
5
6
Note: During the channel scanning, cannot change to other panels (General or about)
of the setting menu.
www.multilaser.com.br
Usage Description
1. Tap to exit the Setting Menu, and back to playback window.
2. If tap the exit button during the channel scanning, all installed
channel will not be saved.
3. All setting will not be saved if tap exit button to exit the setting menu.
Select the region. The list includes:
. All (Default)
. Brazil
. Japan
1. Tap "Scan" to Start a new Channel Scanning. And Scan Button will
change to "Stop" Button after that.
2. Tap the "Stop" button will stop current channel scanning, and it will
change to "Scan" button. The progress bar will also be set to completed
status, and all installed channels will be saved.
3. If complete channel scanning, all installed channels will be saved.
Display all scanned channel in this area after channel scanning is
finished.
1. Tap "Apply" button to Save all the Settings Change and close
setting menu.
2. During the channel scanning, "Apply" button will be hidden.
1. Tap "Cancel" button will not save installed channels and close
setting menu.
2. During the channel scanning, "Cancel" button will be hidden.