Instructions For Use - koban KVD-01-33 Manual De Instrucciones

13. Instructions for use

Visual Inspection
Remove detector from its carry case then visually, inspect it. Feel it
Everything must be smooth. Should it not be the case, send the
detector to the factory to replace the case.
Cleaning the detector using a cloth
Gently, clean the detector external body, using the supplied cloth
removed.
Battery Check
Depress the Red "TEST/ARM" button, then release. The High
ok. If not, replace the battery.
Buzzer, and High Bright Red Light.
Depress and hold down the Red "TEST/ARM" button, The buzzer
If not, send the detector back to the factory for repairs.
Check the Adaptor
Make sure the adaptor is not cracked and is tightly screwed onto
the detector. Should the adaptor show any type of crack, do not
use it, as it could break while you are using it.
Only use a good quality adaptor.
-11-
www.grupotemper.com