Steren MUL-057 Manual De Instrucciones página 21

MEASURING AUDIBLE CONTINUITY
1.- Connect the red testing point in the jack signaled "VΩmA"
and the black testing point in the jack signaled "COM".
2.- Set the dial to the ")))" range.
3.- Connect the testing points on the circuit to be measured. If
the resistance is less than 100Ohm the multimeter will sound.
SPECIFICATIONS
Input: 9V - - - (1 battery of 9V)
Resistance: 200 a 2Mohms +/- 1% accuracy
Voltage cc: 200mV to 600V +/- 0,8% accuracy
Voltage ca: 200 to 600V +/- 2% accuracy
Current cc: 200uA to 10A +/- 2% accuracy
LCD display: 3 1/2 digits, with polarity indicator.
Operating temperature: 0 to 50°C
Relative humidity < 80%
Antes de utilizar su nuevo Kit C
Product design and specifications are subject to change,
without notice.
ENGLISH-10