Connect To A Network; Windows 8; Windows 7 - Nilox DPW-210X Manual De Instrucciones

CONNECT TO A NETWORK

Windows 8/7 can manage the USB/PCI client with its embedded utility for wireless networks; Windows 2000/Vista/XP
requires an external management utility (provided on the CD) to set and manage the USB/PCI wireless client.
W 8
INDOWS
 Right-click on the Wireless LAN icon [
Connect
 If the selected AP supports WEP or WPA/WPA2 you have to enter the password in order to connect to the wireless
network, then click on Next
If you can't see the wireless networks list, please check the drivers are installed properly.
W 7
INDOWS
You can access the Connect to a network dialog box from many locations in Windows 7, including the following:
 By clicking Start, and then Control Panel (select Large/Small Icon) then click on Network and Sharing Center
icon. Click on Connect to a Network
 From Manage wireless connections (in Wireless) select the wireless network SSID and click Connect
If no wireless network is available, please check if the USB/PCI wireless client is correctly installed on your PC.
] into system Tray. Select the wireless network SSID (right click) and click
16
ENG