Appendix A: Connect To A Network Using Windows Client; Windows Vista; Windows Xp - Nilox DPW-210X Manual De Instrucciones

APPENDIX A: C
ONNECT TO A NETWORK USING
MS Windows XP and Windows VISTA can manage the USB/PCI Wireless Adapter/Card with its embedded utility for
wireless networks;
W VISTA
INDOWS
You can access the Connect to a network dialog box from many locations in Windows Vista, including the following:
 By clicking Start, then Connect To, from the Windows Vista desktop
 From Manage wireless connections dialog box
 From Connect/Disconnect context menu option of a wireless network adapter in the Network Connections folder
 Select Wireless (on the combo box) in the field Show, select the wireless network SSID and click Connect
If no wireless network is available, please check if the USB/PCI wireless client is correctly installed on your PC.
W XP
INDOWS

Double click on Wireless network icon in the system tray (see picture)

Select the wireless network SSID and click Connect
Windows XP provides wireless configuration utility named windows zero configuration which provides basic
configuration function for Wireless PCIe Card.
Right after the installation, please follow the steps below to activate the Windows XP Zero Configuration:
Go to "Control Panel" and double click "Network Connections".
Right-click "WLAN 802.11n Wireless LAN", and select "Properties".
Select "Wireless Networks" tab, and check "Use Windows to configure my wireless network settings", and then
click "OK".
If no wireless network is available, please check if the USB/PCI wireless client is correctly installed on your PC.
W
INDOWS CLIENT
18
ENG