Sylvania CT202SL8 Instrucciones página 48

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

T
ROUBLESHOOTING
Symptom
Remote control does not work
Misspelled captions are dis-
played.
Captions are not entirely dis-
T
played, or captions are delayed
behind the dialogue.
V
Captions are displayed as a
white box.
No caption is displayed in the
Closed Caption-supported
program.
No caption is displayed when
playing back the cassette tape
containing captions.
Black box is displayed in the TV
screen.
Poor or no picture in playback
Cannot go into recording mode
V
Timer recording does not work
or results in failure
C
R
Picture or color fades in and out
when copying a cassette tape
Completely distorted picture or
black/white picture with DVD
Picture freezes momentarily dur-
ing playback.
Disc cannot be played back.
D
Buttons do not work or the unit
V
stops responding.
D
The unit does not respond to
some operating commands dur-
ing playback.
Angle does not switch.
Playback does not start
when the title is selected.
The password for rating level
has been forgotten.
48
EN
Remedy
• Check the antenna or cable connection to the main unit.
• Check the batteries of the remote control.
• Check if there is an obstacle between the infrared sensor window and the remote control.
• Test the signal output. If OK, then possible remote sensor trouble. (Refer to "IR Signal Check"
on page 49.)
• Aim the remote control directly at the infrared sensor window on the front of the unit.
• Reduce the distance to the unit.
• Re-insert the batteries with their polarities (+/– signs) as indicated.
Problems with Closed Caption Feature
• Closed captioning production companies may broadcast programs without correcting
the misspelling in a live broadcast.
• Captions that are delayed a few seconds behind the actual dialogue are common for live
broadcasts. Most captioning production companies can display a dialogue to a maximum of
220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
• Interference from buildings or weather conditions may cause captioning to be incom-
plete.
• Broadcasting station may shorten the program to insert advertisement. The closed cap-
tion decoder cannot read the information of the shortened program.
• The cassette tape may be illegally copied, or the caption signal might not have been
read during copying.
• The text mode is selected for caption. Select "CAPTION1", "CAPTION2" or "OFF".
• Adjust tracking control.
• Try video head cleaning.
• The cassette tape may be old or worn. Replace with new one.
• Make sure the cassette tape has an erase-prevention tab. If necessary, cover the hole
with plastic tape.
• Make sure the begin/end time is set correctly.
• Make sure the power is off to activate timer recording.
• Check if the unit's clock is set to current time and date.
• The program may contain copy protection signals that restrict copying.
• The timer setting overlapped with another setting has priority.
• Check if the cassette tape reached the end during recording.
• Check if the power failure during recording.
• You cannot copy a copyrighted cassette tape. You are experiencing copy guard protec-
tion.
• Make sure the disc is compatible with the unit.
• Check the disc for fi ngerprints/scratches and clean with a soft cloth wiping from center
to edge.
• Clean the disc.
• Ensure the disc is correctly inserted.
• Check if the disc is defective by trying another disc.
• Cancel the parental lock or change the control level.
• Insert a correct disc that can be played back on this unit.
• Handle a disc with special care so that it does not have fi ngerprints, scratches, or dusts on its surface.
• To completely reset the unit, unplug the power cord from the power outlet for 5-10
seconds.
• Operations may not be permitted by the disc. Refer to the instructions of the disc.
• The angle cannot be switched for DVD which do not contain multiple angles. In some
cases multiple angles are only recorded for specifi c scenes.
• Check the parental setting.
• Enter the default password "4737", then your forgotten password will be cleared.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido