Schlage Touch BE375 Instrucciones De Instalación página 4

Basic Programming Functions
Go to schlage.com/faqs-touch for videos, more advanced programming instructions, and more. Register your product at
RegisterMySchlage.com.
ADD OR REMOVE USER CODE
1
Enter 6 digit
Programming
Code
Wait for 3
orange lights
and 3 beeps
CHANGE THE PROGRAMMING CODE
1
Enter 6 digit
Programming
Code
Wait for 3
orange lights
and 3 beeps
Battery Jump
The emergency battery jump start can be used if your battery is dead to unlock your door. Do not remove the battery until you
have opened your door.
WARNING: The lock will remain unlocked until you change the battery or manually relock the door from the inside!
1. Connect a new high-quality alkaline 9
volt battery to the contacts below the
touchscreen keypad.
»
Keep the battery connected to the jump
start contacts as you unlock your door.
4. Replace the dead battery with the new 9 volt battery.
Questions about your new
Keyless Touchscreen Lock?
Please don't return it to the store!
Let us help you first!
2 3
Press Choose and
press:
1
add
or
2
delete
2 3
Press Press
3
2. Enter a User Code into the
4
Enter
user code to
add or delete
Wait for 3
orange lights
and 3 beeps
4
Enter new
Programming
Code
Wait for 3
orange lights
and 3 beeps
keypad.
5 6
Re-enter Success!
user code to
confirm
1 green light
and 1 long
beep
5 6
Re-enter Success!
new
Programming
1 green light
Code to
and 1 long
confirm
beep
3. Rotate the thumbturn toward
the hinges.
Scan for
programming
information, help,
warranty, and more.