GYS BT 2010 Manual De Instrucciones página 11

Original manual
Translation of the original manual
MAINTENANCE
Examples
Display switched off
Printing fault
Insufficient internal battery
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
BT 2010
Check that the device is connected to the battery. The battery voltage is not high
enough to perform the test (<1.0 V). Fully charge the battery and try again.
Paper jam: the paper is not inserted correctly. Out of print paper: Insert paper.
Replace the batteries in the tester.
Solutions
EN
11