All 2 pickups models : Pickup Balancer
The pickup balance control pot allows the user to blend between the front
and back pickups using a single pot. The center position of the pot has a
de-tent which will set both pickups to equal output. Turning the knob
clockwise increases the neck pickup while decreasing the output of the
bridge pickup. Turning the knob counter clockwise decreases the neck
pickup and increases the output of the bridge pickup.
SR with VARI-MID III
The battery should be changed when the volume becomes weak
or the sound becomes distorted. Use a new 9-volt alkaline (not
lithium or carbon) battery. The battery is stored inside battery
cavity or control cavity. Inserting a plug into the jack activates
the power supply. Be sure to disconnect the cord when the bass
is not in use; this will prevent the battery from draining.
BASS CONTROLS
BTB with BARTOLINI ITBT-18
BATTERY
BRIDGE
NECK
PICKUP
PICKUP
5