Control Panel Configuration - ECOFOREST ecoSMART e-system Manual Usuario

behavior of the control depending on the state of the distribution grid, favoring its
stability and contributing to balance the grid.
Batteries electrical storage
The ecoSMART e-system manages the charge and discharge of a bank of lithium-ion
batteries up to 12kWh capacity, which allows you to accumulate part of the surplus to
feed the electrical consumption of your home when there is no production or charge
the batteries from the grid when energy is cheaper to consume when it is more
expensive. As it is a modular system, you can adapt the bank's capacity to your particular
needs.
"Plug&play" system
The ecoSMART e-system integrates all the elements necessary for the start-up and
correct operation of a photovoltaic self-consumption system (with the exception of the
PV modules) inside the case, which reduces costs, minimizes the space required and
facilitates its installation.
Intelligent, versatile and "user-friendly" management
The system continuously monitorizes the system performance and notifies if there is a
problem. The application interface allows us to view and control the functions of the e-
system easily.

3. CONTROL PANEL CONFIGURATION

▪
Depending on the software version and configuration established by the technical service, there
may be screens or contents thereof that are not shown.
▪
If the following screen appears when accessing menu, this means that the service requested has
not been enabled by the technical service.
NOTE
User manual ecoSMART e-system


5h
30