Warranty Conditions - Bernal S 2000 Vista General Montaje

GB
Check before the installation
To ensure the necessary security and the smooth operation of
the actuators, the following preconditions must be checked:
– The gate must be suitable for the actuator system. It must
especially be ensured that it is sufficiently strong and rigid. For
metal gate leafs we recommend establishing the connection to
the actuators with screws. For wooden gates the fixing screws
must be fully supported on the inside and outside with metal
plates, since otherwise the screws could loosen over time.
– The dimensions and weights must match the specifications
of the technical properties.
– Check for the smooth and uniform movement of the leafs and
make sure that there is no friction or obstructions during the
entire movement.
– Mechanical stops for the positions "Gate OPEN" and "Gate
CLOSED" must be present.
– If necessary, remove any present locks and stoppers.
After the installation
– There is an increased risk of injury in the immediate vicinity
of the posts.
– The movement of the leafs should not be counteracted
deliberately.
– Branches and shrubs may not interfere with the operation of
the automatic gate system.
– The systems of the indicator light display should always be
functional and clearly visible.
– The leafs should only be moved manually after the
disengagement/release has been performed.
– In the event of malfunctions, the leafs must be disengaged/
released to allow a passage. It should be waited until qualified
personnel is available for technical assistance.
– We recommend performing an operating capability test of the
gate system, security devices and accessory equipment at least
once every six months through qualified personnel.
10

Warranty conditions

– Excluded from the warranty are damages that are caused by:
- use-related, normal wear, improper installation,
connection, operation or treatment
- acts of God or other external influences
- improper maintenance or repair by third parties
- technical alterations by third parties
– In case of a warranty case we will repair the product at our
discretion, or exchange it for an equivalent BERNAL product.
– Replacement or repair of the unit will not extend the warranty
period.
– A condition for a warranty claim processing is the presenta-
tion of a copy of the original sales receipt. When shipping the
units please include a copy of the original sales receipt and a
description of the defect.
– The warranty period can be obtained from the technical data