Remote panel can be installed both as a wall panel or on a horizontal plane (desk).
To open FKP500 Consolle, unscrew the 4 side screws on the right side and remove closing plastic profile; then
take the board complete with keypad support out of aluminium section.
On the bottom of aluminium section, 3 holes are present enabling wall fixing; the panel has available two entries
covered by cable tray for laying cables through the interior of the container.
5 INSTALLATION
OFF
ON
Riarmo
Tacitazione
Verifica
Reset
Lampade
Sirena
Sirena
Allarme
Guasto
Escluso
Sirena Esclusa
OFF
ON
Riarmo
Verifica
Reset
Lampade
Sirena
Allarme
Guasto
Escluso
Fig. 1 – Opening the housing
85.0mm
[3.35in]
80.0mm
[3.15in]
Ø4.0mm
[Ø0.16in]
Fig. 2 – Drilling template for mounting
16/40
Aumento
Ritardo
Aumento Ritardo
Tacitazione
Aumento
Sirena
Ritardo
Sirena Esclusa
Aumento Ritardo
ON
85.0mm
[3.35in]
000046
FKP500