Basic Programming Guide; Keyboard + Lcd; Lock Status Display; Main Menu Display - Fagor HAN 8000 Manual De Instrucciones

7

BASIC PROGRAMMING GUIDE.

7.1 KEYBOARD + LCD.

7.1.1 Lock Status display

7.1.2 Main menu display

After initialization, the menu shows as below
the 'enter' key to confirm):

7.1.3 Encoder Setting.

Encoder1, Encoder2, Encoder3 and Encoder 4 are programmed in the same way. Below taking
encoder1 as an example: use Up and Down keys to choose encoder1 and then it shows as
below
(Press 'up or down' key to choose menu, then press the 'enter' key to confirm)
4IN1 HD HDMI Encoder
PG: 04 Bitrate: 30.000Mbps
(Press 'up or down' key to choose menu, then press
1. Encoder 1
2. Encoder 2
3. Encoder 3
4. Encoder 4
5. ASI
6. Output
Setting
7. IP Output
8. Network
Setting
:
10