Connections; Place Tv On Top; Connect To Power - Maxell MXSB-252BT Manual De Instrucciones

Connections

Place TV on top

The Maxell MXSB-252BT Sound Bar is designed for
use with TV's that do not exceed 50kg, and have
a base no wider than 30cm and a depth no
deeper than 53cm. The MXSB-252BT is
most 42" TV's. However, DO NOT place a
cathode ray tube (CRT) TV on this system. This
system is not designed for use with this type of TV.
Please read the provided Dos and DON'Ts
Leaflet for proper installation position of the unit
Warning:
Please turn down the volume of the TV or other
audio source before connecting.
Loud sound might be suddenly produced.

Connect to Power

Caution:
Risk of product damage!
- Ensure that the AC outlet voltage
corresponds to the voltage printed on
the back or the underside of the unit.
- Risk of electric shock! To unplug the AC
power, always pull the plug from the
socket. Never pull the cord.
- Ensure the correct power cord is used.
Connect the AC power cord to:
- the AC~ socket on this unit.
- the wall
to 3-hole socket or European 2 pin
plug to 2-hole socket)
suitable for
Connect using OPTICAL IN socket
a) Connect the Optical output of the source
device to the input of the speaker. This
connection is for the audio (or sound) only.
b) Connect the Video output of the AV
equipment to the Video input of the TV
via either:
1) Component connection (Green,
2) Composite connection (Yellow),
EN-8
socket.(British 3 pin plug
Blue, Red)(cable not supplied);
or
(cable not supplied).
EU
or
UK