Smart Remote Control; Getting Started; Prepare The Smart Remote Control; Precautions Concerning Batteries - Maxell MXSB-252BT Manual De Instrucciones

Getting Started

Prepare the Smart Remote Control

The Smart Remote Control provided allows
the unit to be operated from a distance.
Even if the Smart Remote Control is

operated within the effective
range(6m), remote control operation
may be impossible if there are any
obstacles between the unit and the
remote control.
If the Smart Remote Control is operated

near other products which generate
infrared rays, or if other remote control
devices using infrared rays are used
near the unit, it may operate incorrectly.
Conversely, the other products may
operate incorrectly.
For First-time use:
The unit has a pre-
installed lithium CR2025
battery. Remove the
protective tab to
activate the remote
control battery
To Replace the Smart Remote Control
Battery:
(A) : Press down the tab on the left.
(B) : Pull out the battery tray and
remove the old battery.
(C) : Place a new CR2025 battery into
the battery
polarity (+/-) as indicated.
(D) : Insert the tray back into the slot.
tray with correct

Precautions Concerning Batteries

When the Smart Remote Control is not

to be used for a long time (more than a
month), remove the battery from the
Smart Remote Control to prevent it from
leafing.
If the batteries leak, wipe away the

leakage inside the battery
compartment and replace the
batteries with new ones.
Do not use any batteries other than

those Specified
Do not heat or disassemble batteries.

Never throw them in fire or water.
Do not carry or store batteries with other

metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
Never recharge a battery unless it is

confirmed to be a rechargeable type.
EN-7
.