Whole House Salt-Free Natursoft ® Tank Installation - Enviro NaturSoft Pro Serie Manual Del Proprietário

Enviro Water Products Pro Series Water Filter and
Salt-Free NaturSoft System
®
Whole House Salt-Free NaturSoft
1. Level the Enviro Water Products Salt Free NaturSoft
Wall
Figure 8
2. Determine the size and material of your incoming water supply line from the Whole House Water
Filter and choose the appropriate fittings required to connect it to the Bypass Valve.
CAUTION:
Do not over-tighten any of the fittings during installation.
Table 3: Bypass Valve Fittings
Note: The fitting below is designed with a ¼
is intended to have some flexibility.
Part Description
1" Plastic Male NPT Assembly:
V3007-04 WS1 Fitting 1" Plastic Male
NPT Assembly (2): O-Rings (2), Split
Rings (2), and Connectors (2)
3. Install the fitting onto the inlet and outlet sides of the Bypass Valve. Follow the diagrams
supplied with the fitting.
4. Connect the incoming water supply from the Whole House Water Filter to the fitting on the
inlet side of the Bypass Valve.
5. Connect the outgoing water supply to the outlet side of the Bypass Valve.
© 2014 Enviro Water Solutions LLC
3060 Performance Circle, Suite 2. DeLand, FL 32724
Tank Installation
®
Sediment Filter
Incoming
Water
Supply
Whole House
Water Filter
give to allow for proper pipe alignment. It will not leak and
"
Qty.
1
bag
® tank.
PVC Fitting*
Salt-Free NaturSoft
Split Ring
www.envirowaterproducts.com
Rev C
Page 11
Wall
Outgoing
Water
To House
1" NPT Assembly
*Customer supplied,
®
choose appropriate
connection
Quick Connect Nut
O-Ring