Sauder Dresser Manual Del Usuario página 15

Step 10
Fasten the RIGHT END (A) to the TOP (D) and BOTTOMS (E). Tighten
å
four HIDDEN CAMS.
NOTE: Be sure the METAL PINS in the BOTTOMS insert into the holes
å
in the RIGHT END.
Fasten the BRACE (SS) and FOOT BASE (UU) to the BOTTOM (E).
å
Use four BLACK 1-1/4" FLAT HEADSCREWS (VV) through the BASE,
through the BRACE, and into the BOTTOM. Then, push the FOOT (TT)
into the FOOT BASE (UU).
NOTE: Turn the screw end of the FOOT completely in. Adjustments
å
will be made to the FOOT after the unit is standing upright.
UU
TT
Turn completely in.
Maximum
Arrow
210 degrees
Minimum
190 degrees
BLACK 1-1/4" FLAT HEAD SCREW
E
E
SS
VV
(4 used in this step)
D
G
A
Page 15