Audiovox Prestige P-94 Manual Del Propietário página 2

OPERATING INSTRUCTIONS
1
ON-OFF POWER BUTTON (PWR)
VOLUME LEVEL MEMORY
Press this button momentarily to turn the unit on or off. The unit
will also turn on automatically when a compact disc is inserted if
the ignition switch is "on".
This button is also used to set the memory for the volume level
which will be recalled when the unit is turned on. To set the
volume memory, turn the unit on and adjust the volume using the
2
Volume Control to the level which you wish to be recalled
when the unit is turned on. Then, press the On-Off button and
hold it for approximately 2 seconds. The unit will turn off and the
selected volume level is now set in the memory. If the unit is
turned off with the volume higher than the memory setting, the
unit will return to the memory setting when turned back on. If,
however, the unit is turned off with the volume lower than the
memory setting, the unit will return to the lower setting when
turned back on.
2
VOLUME LEVEL CONTROL
To increase the volume level, press the "VOL +" side of the button.
The volume will increase and the level will be shown on the display
panel from a minimum of 0 to a maximum of 80. To increase the
volume quickly, keep the button pressed. To decrease the volume
level, press the "VOL -" side of the button. Keep the button pressed
to decrease the volume quickly. The display will automatically
return to the normal indication 5 seconds after the last volume
adjustment or when another function is activated. These buttons
are also used in conjunction with the Select button
bass, treble, balance, and fader levels as described in
7
and .
-1-
3
to adjust the
4 5 6
, ,