Complete The Installation; Accessing The Axis 209Fd/Fd-R/Mfd From The Internet - Axis 209FD Guia De Instalacion

Page 12

Complete the installation

1. Clean the dome with a dry soft cloth to remove dust and fingerprints and use a blower to
remove any dust from the lens.
2. To absorb any moisture in the
AXIS 209FD-R, remove the
supplied silica gel sachet (dry
bag) from the plastic bag and
affix inside the cover, behind
the dome.
3. Replace the cover and gently
tighten the tamper-proof screws
by hand (torque < 0.4 Nm),
using the supplied allen key. In
the AXIS 209FD-R, take care
not to pinch the gasket.
The installation is now complete.

Accessing the AXIS 209FD/FD-R/MFD from the Internet

Once installed, your AXIS 209FD/FD-R/MFD is accessible on your local network (LAN). To
access the camera from the Internet, network routers must be configured to allow incoming
traffic, which is usually done on a specific port. Please refer to the documentation for your
router for further instructions. For more information on this and other topics, visit the Axis
Support Web at www.axis.com/techsup
AXIS 209FD/FD-R/MFD Installation Guide
Affix dry bag here (AXIS 209FD-R)