Complete The Installation - Axis P3363-VE Manual Del Usaurio

Page 16

Complete the installation

1. Rotate the black protective shield inside the dome cover so it is aligned
with the camera's position.
2. If required, attach the weather shield to the camera before you attach
the dome cover. To do this remove the two screws in the dome cover.
Transfer the washers from these screws to the two long screws
provided. Attach the weather shield using the two long screws.
3. Attach the dome cover to the unit casing by tightening the 4 screws.
AXIS P33-VE Network Cameras Installation Guide
Black protective shield